众购彩票

Welcome to Dongguan Seagate Automation Equipment Co., Ltd.! TEL:13302606020

How to adjust the labeler to set the sensor

Hits:  UpdateTime:2018-09-20 19:57:43  【Printing】  【Close

The electrical eye and the measuring eye of the test label or product are its key components. The use of the labeling machine is critical to the setting of the electric eye. When the labeling machine is used for production, the label of the product needs to be reset once for the electric eye parameters due to the different manufacturing processes and complicated labeling procedures.

1536133717.jpg

Therefore, the technical engineer of Dongguan Xijie Automation Equipment Co。, Ltd。 introduced the adjustment and setting of the electric eye, so that the enterprise can master the electric eye setting to improve the work efficiency when the enterprise uses the production after the purchase。 The Seagate labeling machine's semi-automatic round bottle labeling machine (extended version) operation steps explain。

First of all, to understand the principle of measuring the electric eye。 The measuring eye is used to detect the label。 It works by identifying the gap between the labels based on the thickness。 Suitable for general self-adhesive labels or other self-adhesive labels with a certain thickness。

There are three signal lights on the electric eye。

Green signal light: power light

Yellow signal: recognition status light (yellow light indicates signal output)

Red signal light: error or warning light

1) Pass the label through the electric eye U-slot

2) If the label is pulled, the yellow signal light illuminates in the interval between the label and the label, and is extinguished in the marked place, which means that the electric eye is normal and can be used directly.

3) When the yellow signal light is always on or off, you need to reset the electric eye.

4) Calibration eye setting steps:

a. Pass the label through the U-shaped slot of the electric eye.

b. Place the label in the slot of the electric eye, you can see the yellow light of the electric eye flashes, then release the button, place the unlabeled area in the electric eye slot, and release the button.

c。 Pull the label in the electric eye slot to see that the yellow signal light is off when there is a label in the U-shaped slot。 When the yellow signal light is on at the bottom paper where the label and the label are not separated by the label, the electric eye is working normally and the setting is completed。


Powered by  ©2008-2020 
山东群英会app 众购彩票主页 众购彩票官网 河北11选5走势图 凤凰彩票技巧 凤凰彩票平台 众购彩票登入 众购彩票主页 众购彩票注册 众购彩票导航